Waste Oil Boiler - Model B500

View other Waste Oil Boiler Systems

AgSolutions Waste Oil Boiler Systems equipped with:

• Kagi Burner

• Re-Usable Oil Filter with Indicator Gauge

• Low Water Cut Off

• Pressure Relief Valve Combo

• Pressure/Temperature Gauge

• High Limit Temperature Controller

• Operating Temperature Controller

• Barometric Damper

Waste Oil Boiler Specifications:

 

Boiler Unit:

• Wet base, horizontal firetube, A.S.M.E. H-2 Code constructed.

• 30 psi boiler with National Board Registration Number.

•  Shell and combustion chamber made of SA36 grade carbon steel , 1/4 inch thick.

• Tube sheet made of SA36 grade carbon steel, 5/16 inch thick.

• Tubes made of SA178A grade 12 gauge carbon steel.

• Boiler has welded tubes and no economizers in the tubes.

• two aquastat wells installed.

•  burner door hinged on the left side complete with ceramic fiber board insulation, sight door and handles.

• Flue collector box complete with removal cover allowing straight through access to boiler tubes and to breeching.

• Nuts for bolts for access door and collector box are brass to reduce heat-related binding.

• Boiler block is black 

•  4" legs, bolted to skid for shipment.

•  shipped with cover jacket and insulation blanket removed. The boiler vessel itself is in a single section.

Waste Oil Boiler Jacket:

• 20 gauge jacket with 1.1# density fiberglass insulation.

• Jacket cover color is blue.

• shipped with cover jacket and insulation blanket removed

 

 Contact us for current pricing and shipping quotes.

 Lease Options Available

 Waste oil can not be burned in all states.

 Most states have adopted the EPA requirements as guidelines.

 Check with your state and local agencies.