Waste Oil Boiler Model B200

The model B200 Waste Oil Boiler will heat 7500 square feet with a fuel flow rate of 1.4 gallons per hour. The hot water output of 4.0 gallons per minute at 230 degrees offers outstanding performance for most uses. The Kagi waste oil burner insures low maintenance, high efficiency operation, and clean burning performance. A full suite of pressure and temperature gauges makes monitoring the waste oil boiler simple, and a re-usable oil filter reduces costs of operation.

The Kagi burner is impressive. A soft start tank which enriches the fuel to air mixture for immediate start-up with higher air pressure and purges the residual oil out of the system preventing nozzle dripping and electrode coking on the waste oil heater. The special KAGI "soft start" tank enriches the fuel to air mixture for immediate start-up with higher air pressure, purging the residual waste oil out of the system. This prevents nozzle dripping and electrode coking, two of the main causes of waste oil boiler failure. The unique KAGI retention head, designed for waste oil Large twin heating elements prevents waste oil overheating - the major cause of pre-heater sludge and plugging.

Should the burner ever need service or parts, it is backed up with one of the top waste oil boiler companies in the world, Kagi Heating and Supplies. This ensures you'll have your boiler back online quickly if problems should arise

View other Waste Oil Boiler Systems

Waste Oil Boiler Systems from AgSolutions equipped with:

• Kagi Burner

• Re-Usable Oil Filter with Indicator Gauge

• Low Water Cut Off

• Pressure Relief Valve Combo

• Pressure/Temperature Gauge

• High Limit Temperature Controller

• Operating Temperature Controller

• Barometric Damper

Waste Oil Boiler Specifications:

Boiler Unit:

• Wet base, horizontal firetube, A.S.M.E. H-2 Code constructed.

• 30 psi boiler with National Board Registration Number.

•  Shell and combustion chamber made of SA36 grade carbon steel , 1/4 inch thick.

• Tube sheet made of SA36 grade carbon steel, 5/16 inch thick.

• Tubes made of SA178A grade 12 gauge carbon steel.

• Boiler has welded tubes and no economizers in the tubes.

• two aquastat wells installed.

•  burner door hinged on the left side complete with ceramic fiber board insulation, sight door and handles.

• Flue collector box complete with removal cover allowing straight through access to boiler tubes and to breeching.

• Nuts for bolts for access door and collector box are brass to reduce heat-related binding.

• Boiler block is black 

•  4" legs, bolted to skid for shipment.

•  shipped with cover jacket and insulation blanket removed. The boiler vessel itself is in a single section.

Waste Oil Boiler Jacket:

• 20 gauge jacket with 1.1# density fiberglass insulation.

• Jacket cover color is blue.

• shipped with cover jacket and insulation blanket removed

 Contact us for current pricing and shipping quotes.

 Lease Options Available

 Waste oil can not be burned in all states.

 Most states have adopted the EPA requirements as guidelines.

 Check with your state and local agencies.